About Nexans
Produkty a řešení
Služby zákazníkům
Pracovat pro Nexans
Novinky a tiskoviny
Thin twin conductor heating cable units for both renovation and new buildings. The units can be installed in two different ways:
1. Millicable™ in combination with Milliclick™ boards. Millicable™ can be installed directly under wooden floor coverings like parquet, laminate etc. without any use of concrete or levelling compound. The Milliclick™ boards have pre-cut slots for the cable which makes the installation very easy to perform. The boards are placed on a stable and levelled subfloor. By using Milliclick™ boards, the area load will be 60 W/m². Install standard parquet underlay between the parquet and the Milliclick™ boards.
2. Millicable™ installed as a conventional heating cable. Millicable™ is then installed as a freely laid cable and attached to the subfloor in the planned C-C distance. The heating cable is then covered with screed or concrete, minimum thickness 5 mm, the entire cable must be covered.
Minimum installation temperature (without any precautions) 0 °C.
