WINDLINK (N)TSCGEHXOE

Application

Medium-voltage trailing cable WINDLINK® MV-RS (N)TSCGEHXOE in two sheath design was developed for special application condition in wind turbines.
The construction is torsion resistance by free hanging max. 100 m.
These cables are specified for medium mechanical stress and for operation under permanent influence of seawater and usage outdoor.

Design

Power-core

Conductor:
Copper, plain, flexible concentrically stranded circular, class 5 acc. to IEC 60228

Insulation:
-  Inner semi-conductive stress control layer, fixed with insulation
-  Elastomeric extruded special rubber compound RHEYCLEAN HV-EPR, quality
    better than 3GI3 acc. to DIN VDE 0207 part 20, based on EPDM,
    optimized wall thickness
-  Outer semi-conductive insulation shield layer, easy strip (Thermostrip),
   compound basis EVA.
All three layers are extruded in one extrusion process and free of hollow space.

Protective-core
Conductor:
Copper plain, flexible concentrically stranded circular, class 5 acc. to IEC 60228
Conductor screen:
extruded semi-conductive rubber

Inner Sheath
Extruded special rubber compound:
quality better than GM1b, acc. to DIN VDE 0207 part 21, fulfil the requirements of EM1, nature colour, the filling of the interstices is integral part of the inner sheath and out of the same material, produced in same process with outer sheath.

Outer Sheath
Extruded special rubber compound:
quality better than EM8 acc. DIN EN 50363-6, based on EVA,
water and oil resistant, flame retardant, abrasion and notch-resistant,
colour: red, embossed marking e.g.:
WINDLINK MV-RS (N)TSCGEHXOE 3x25/25  18/30 kV INEXANSI year