Approval certificates

Adapted to VDE 250 Part 1

Application

Especially for frequency converter controlled AC drives. For fixed installation and occasional free flexing indoors in dry, damp and wet conditiones, as well as outdoor for low mechanical stress. Not suitable for the installation direct in ground and in water. Cores are normally identified by colours according to HD 308 S2.

Design

• Conductor

  plain finely stranded copper, Class 5 according to VDE 0295 or IEC 60228

• Protective Conductor

  plain finely stranded copper, Class 5 according to VDE 0295 or IEC 60228 - for cross sections > 16mm² the protective conductor is divided into 3 cores

• Insulation

  halogen free special XLPE according to IEC 60502-4 max. core temperature: 90C°

• Screen

  Multilayer screen, EMC - optimized regarding to radio frequency interference field strength and voltage according to EN 55011 or DIN VDE 0875

1. Layer: Al - coated tape

2. Layer: braid of tinned copper wires

3. Layer: separator tape

• Outer Sheath

  special halogen free oilresistant Polyurethan,

   Colour: black

Core identification

• Colour: according to HD 308 S2
• grey + brown + black + green/yellow (3x)